Material Handling
We have the ability to handle a wide range of weight and sizes of raw stock, components or finished products.
Fabrication Shop – 4 Bays – 60,000 Sq. Ft.
| Specs | |||
|---|---|---|---|
| High Bay | 40’ x 350’ | Cranes | (1) 60,000# (2) 30,000# (1) 15,000# |
| Middle Bay | 35’ x 350′ | Cranes | (1) 30,000# (2) 20,000# (1) 15,000# |
| South Bay | 40’ x 350’ | Cranes | (1) 20,000# (2) 20,000# |
| North Bay | 35’ x 310’ | Cranes | (1) 20,000# (1) 10,000# |
1 Ton Jib Cranes Throughout
Machine Shop – 2 Bays – 25,000 Sq. Ft.
| Specs | |
|---|---|
| (1) 20 ton | (1) 10 ton Bridge Crane Ea. Bay |
Latest Manufacturing Addition – 2 Bays – 15,000 Sq. Ft.
| Specs | |
|---|---|
| (1) 30 ton Bridge Crane Ea. Bay | 45′ x 90′ Open Assembly Area |
| Forklifts | |||
|---|---|---|---|
| (1) 36,000# Taylor | 8,000# Caterpillar | 6,000# Caterpillar | 6,000# Yale |
Weld Positioners
| All Aronson | 135° Tilt | 360° Rotation | Adjustable Height |
|---|
| (1) 350,000# |
| (1) 70,000# |
| (1) 350,000# |
| (1) 50,000# |
| (3) 24,000# |
| (2) 10,000# |
| (2) 6,000# |
| (2) 3,000# |
| (1) Set Drive & Idler 60,000# Turning Roll Rubber Tire |
| (2) 40,000# Turntables |
| (1) Fully Automatic Lincoln Sub Arc / Aronson Manipulator Welding Cell | 3 Axis Power Travel |
| (1) 60” x 60” Aronson Manipulator |
| Trucks | |
|---|---|
| (1) 60,000# GVW 8’w x 25’Lg Flat Open Body | (1) 18,000# GVW 8’ x 10’ Lg Flat Open Body |
In-Stock Inventory
We stock a varied range of material, from 1/4″ inch up to 14″ thick, in 1/4″ and 1/2″ increments. All material is fully traceable by heat and lot number for quality control purposes.